-
Package Testing Equipment
-
WVTR Testing Equipment
-
Vacuum Leak Testing Equipment
-
Friction Testing Equipment
-
Adhesion Test Equipment
-
Tensile Testing Machine
-
Box Compression Testing Machine
-
Torque Testing Machine
-
Tear Testing Machine
-
Gas Permeability Tester
-
Heat Seal Tester
-
Falling Dart Impact Tester
-
Flex Durability Tester
-
Digital Ink Rub Tester
-
Headspace Gas Analyzer
-
Thickness Measurement Equipment
Bench Top Laboratory Tensile Strength Test Machine used for puncture testing for rubber stopper
Test Material | Rubber Stopper, Films, Infusion Bags | Training | Free, Door-to-door |
---|---|---|---|
Warranty | 12 Months | Usage | Laboratory Use For Flexible Packaging |
Customization Service | Available | Accuracy | 1% FS |
High Light | Universal Tensile Tester,Tensile Test Apparatus |
Bench Top Laboratory Tensile Strength Test Machine used for puncture testing for rubber stopper
Laboratory Tensile Strength Test Machine can be used to determine the puncture force of medical rubber closure,Hypodermic Needles in Artificial Skin, Infusion Bags, Oral Liquid Caps and plastic films.
A: Prepare test specimens according to specific standards. Adjust the sample grips and mount the specimen. Prepare 10 rubber closures to be tested and another 10 rubber closures with already known puncture force and then mount the rubber closures to corresponding infusion bottles. Fix the infusion bottle with rubber closure in the device for puncture test. Wipe the needle with acetone and make sure the needle is sharp then install the needle in the device for puncture test so that the needle could puncture the rubber closures from the center of them.
B: Select “Puncture Force Test of Rubber Closure” in test mode to create new test. Then set up test parameters and specimen parameters.
C: Click “Test” button to start the test. The test curves will be displayed in real time. When a single test is finished, the upper sample grips will return. When the upper sample grips return, the test results will be calculated automatically and it will return to the result interface. If necessary, mount next specimen and click “Test” button. When all tests are finished, click “Generate Result”.
Specifications
XLW (M) Tensile Strength Test Machine | |
---|---|
Load Cell Capacity | 100 N, 200 N, 500 N (one of them is available) |
Accuracy | 1% FS |
Test Speed | 50, 100, 150, 200, 250, 300, 500 mm/min |
Number of Specimens | 1 |
Specimen Width | 30 mm (Standard Grip) 50 mm (Optional Grip) |
Clamping Way | Pneumatic Specimen Clamp |
Stroke | 600 mm |
Pressure of Gas Supply | 0.5 MPa~0.7 MPa (outside of supply scope) |
Port Size | Φ4 mm PU Tubing |
Instrument Dimension | 450 mm (L) x 580 mm (W) x 1100 mm (H) |
Power Supply | AC 220V 50Hz |
Net Weight | 60 kg |